News

Prozeda controller range

Bright idea: The Primos 250 Controller
Bright idea: The Primos 250 Controller
The Prozeda Primos 600 solar thermal controller has 6 x temperature inputs ( PT 1000 sensor ), 4 x 230V outputs & 2 x additional low voltage outputs with Pulsed Width Modulation (PWM) to control high efficiency pumps. It also has a connection for Vortex Flow Sensor for yield measurement. This controller is predominantly for solar thermal applications with various hydraulic layouts including systems with two collector fields or two stores. It can also be used to control various back up energy sources and to operate diverting valves within the hydraulic circuit. For simpler solar applications with one collector field, the Primos 250 will suffice and still has the ability to data log and web view system information as standard, this control also can control HE pumps and has a relay output to control another heat source.

3 min read

The Grandis 600 HK will perform the same duties as the Primos 600 & 250, however this controller is more advanced and has 10 x temperature inputs ( PT 1000 sensor ), 8 x 230V outputs & 2 x additional low voltage outputs with Pulsed Width Modulation (PWM) to control high efficiency pumps, it also has a connection for 2 x Vortex Flow Sensors for yield measurement. The Grandis 600 HK will also control and weather compensate two separate mixed heating circuits, this is ideal for high temperature panel heating systems working alongside mixed lower temperature under floor heating, both controllers are available to connect with a Building Management System (B.M.S ) and also sounds an audible alarm on any system error.

Technical data

Prozeda Primos 250

Mechanical data
Size 176 x 162 x 44mm, protection class IP 30, light grey, cover plate Prozeda with 4 centralized operation touch pressure keys.
1 output 230V AC
1 electronic control output PWM and 0-10V analogue
4 temperature inputs PT1000

  • Intuitive operating menu with plain-text, graphic symbols and four operating buttons
  • Illuminated LCD display ( 60 x 45mm )
  • Adjustable control values
  • Intelligent speed control of the solar pump via PWM, analogue signal or 230V block modulation
  • Drain-Back function
  • Tube collector function with adjustable time slots
  • Intelligent primary and secondary charging
  • Integrated operating hours counter for storage tank charging
  • Integrated energy yield measurement (input flow rate)
  • Extensive functions for system monitoring. Malfunctions are shown in the display with corresponding symbols and additional optical signals (blinking backlight)
  • Storage of all values even during a prolonged mains power supply outage
  • Various protection functions, such as system protection, collector protection, anti-freeze protection, re-cooling and flow monitoring
  • RS485-interface (ProBus). Networking of additional Prozeda controllers, remote access to all controller configurations and collected values, data logging, update function etc.
  • Micro SD-Card interface for storing and reading of collected values, operating data and system states (data logging), firmware update, reading and loading of configurations
  • Generous wiring space

Two multi-functional controllers (MFR) with three freely selectable controller functions each

Prozeda Primos 600
Mechanical data
Size 176 x 162 x 44mm, protection class IP 30, light grey, cover plate Prozeda with 4 centralized operation touch pressure keys.
4 outputs 230V AC
2 electronic control outputs PWM and 0-10V analogue
1 interface for Grundfos VFS
6 temperature inputs PT1000

  • Intuitive operating menu with plain-text, graphic symbols and four operating buttons
  • Illuminated LCD graphic display ( 60 x 45mm )
  • Adjustable control values
  • Intelligent speed control of the solar pump via PWM, analogue signal or 230V block modulation
  • Drain-Back function
  • Tube collector function with adjustable time slots
  • Intelligent primary and secondary charging
  • Integrated operating hours counter for storage tank charging
  • Integrated energy yield measurement; input flow rate or optional flow meter (Impeller wheel sensor, Grundfos VFS)
  • Extensive functions for system monitoring. Malfunctions are shown in the display with corresponding symbols and additional optical signals (blinking backlight)
  • Storage of all values even during a prolonged mains power supply outage
  • Various protection functions, such as system protection, collector protection, anti-freeze protection, re-cooling and flow monitoring
  • RS485-interface (ProBus). Networking of additional Prozeda controllers, remote access to all controller configurations and collected values, data logging, update function etc.
  • Micro SD-Card interface for storing and reading of collected values, operating data and system states (data logging), firmware update, reading and loading of configurations
  • Generous wiring space

Four multi-functional controllers (MFR) with ten freely selectable controller functions each

Prozeda Grandis 600HK

Mechanical data
Size 176 x 162 x 44mm, protection class IP 30, light grey, cover plate Prozeda with 4 centralized operation touch pressure keys.
8 outputs 230V AC
3 electronic control outputs PWM and 0-10V analogue
2 interfaces for Grundfos VFS
10 temperature inputs PT1000

  • Intuitive operating menu with plain-text, graphic symbols and four operating buttons
  • Illuminated LCD graphic display ( 60 x 45mm )
  • Adjustable control values
  • Intelligent speed control of the solar pump via PWM, analogue signal or 230V block modulation
  • Drain-Back function
  • Tube collector function with adjustable time slots
  • Target temperature charging
  • Intelligent primary and secondary charging